Hioki BT3554-50 - Preliminary Preparation; Transferring the Profile Information to the Instrument

96
Preliminary Preparation
6.1 Preliminary Preparation
Transferring the prole information to the
instrument
The instrument can be populated 100 sets of prole information
(comments, such as location information and device information,
and the numbers assigned to batteries under measurement). You
can save measured data in connection with prole information
previously registered.
For a mobile device
1
Connect the Z3210 Wireless Adapter (option) into the
instrument.
See “2.3 Connecting the Z3210 Wireless Adapter (Option)”
(p. 39).
2
Install version 1.8 or later of GENNECT Cross on your
mobile device.
3
Use GENNECT ONE to register prole numbers, battery
numbers, and memory numbers corresponding to the
battery numbers.
4
Transfer the prole information to the instrument.
HIOKI BT3554F961-00HIOKI BT3554F961-00