Hioki DT4252 - Page 28

20
Parts Names and Functions
Measurement terminals
DT4254DT4252
DT4255DT4253
DT4256
1
1
2
2
3
3
DT4251 DT4252 DT4253
DT4254 DT4255 DT4256
DT4251 DT4252 DT4253
DT4254 DT4255 DT4256
DT4251 DT4252 DT4253
DT4254 DT4255 DT4256
1
Current measurement terminal.
Hereafter referred to as “A terminal (µA terminal, mA terminal)”.
The red test lead is connected.
2
Commonly used for each measurement.
Hereafter referred to as “COM terminal”.
The black test lead is connected.
3
Used for voltage measurement, resistance measurement, continuity
check, diode test, temperature measurement, electrostatic capacity
measurement, or clamp current measurement.
Hereafter referred to as “V terminal”.
The red test lead is connected.
Be sure to carefully read the following precautions for the terminals with the
marking.
• “Precautions during shipment” (p. 13)
• “6.4 Replacing Fuses” (p. 100)