To Next PageTo Next Page
Need help?Do you have a question about the Hioki 3802-50 and is the answer not in the manual?
General| Type | Digital Multimeter |
|---|---|
| Measurement Functions | DC Voltage, AC Voltage, DC Current, AC Current, Resistance, Frequency, Temperature, Capacitance |
| Frequency Range | 10.00 Hz to 100.0 kHz |
| Capacitance Range | 1 nF to 100 μF |
| Display | LCD |
| Interface | USB |
| Power Supply | AA batteries |
Identifies and explains the purpose of each component on the instrument's front panel.
Guides users through checks before operating the instrument to ensure proper function.
Provides step-by-step instructions for measuring AC and DC voltages safely and accurately.
Details the procedure for measuring AC and DC currents, including safety precautions.
Explains how to measure resistance (Ω) and conductance (nS), covering procedures and precautions.
Describes conductance measurement using nS units, useful for very large resistance values.
Describes how to perform a continuity check, including how the buzzer indicates continuity.
Outlines the process for checking diodes, including expected voltage readings and buzzer indications.
Details the method for measuring capacitance, including sample rates and charge/discharge indication.
Explains how to display frequency during voltage or current measurements using specific keys.
Describes how to measure the duty ratio of a pulse signal, including definitions and display.
Details the measurement accuracy specifications for various ranges and functions.
Offers solutions for common operational problems and symptoms.
