Hioki 3802-50 - Hold Functions; Trigger Hold Function

3.3 Hold Functions
35
1
2
3
4
5
6
7
8
9
10
11
Additional Functions
3.3.1 Trigger Hold Function
The trigger hold function locks the value that was being
measured at the moment that the
HOLD key was pressed.
1. Turn the refresh hold function off.
❖ See Section 4.7 Refresh Hold Setting (page 58)
2. Press the HOLD key during measurement to lock the
displayed value.
3. To update and lock the displayed value again, press
the
HOLD key again.
To cancel the trigger hold function, press and hold the
HOLD key.
3.3 Hold Functions
Display being updated
(TRIG flashes)
Display locked after update
(TRIG lights)