46
3.8 Warning Functions
3.8.2 Overload Warning
During voltage measurement, if the input voltage exceeds
1010.0 V, the 3802-50 sounds an intermittent beep as a
warning. Remove the test leads from the test subject
immediately.
If full scale is exceeded in any of the ranges, "OL" is
displayed. Either set auto range or else select the cor-
rect range.
❖See Section 3.1 Auto Range Function (page 33) and Section 3.2
Manual Range Function (page 34)
Range Full Scale
51000 counts 51000
10000 counts 15000
10.000 A counts 51.000 A
9999 counts 11000
99999 counts 99999
To Next Page
Loading...
