Hioki 3802-50 - Display Backlight Setting

60
4.9 Display Backlight Setting
This procedure sets the time until the display backlight
turns off. To turn on the display backlight, press the
key. To turn off the display backlight before the time
elapses, press the key again.
4.9 Display Backlight Setting
34
1. In order to display the Power On
Option setting screen, hold dow
n
the SHIFT key while turning th
e
function switch.
2. Press the
REL key 3 times to di
s-
play the Display Backlight settin
g
screen.
3. Set the time until the display bac
k-
light turns off.
RANGE key: Increases the value
DUAL key: Decreases the value
SHIFT key: Selects the digit
4. Confirm the selection by pressin
g
the Hz key.
5. Hold down the
SHIFT key to ent
er
the measurement screen.
Otherwise, turn the function switc
h
to OFF to finish setup.
30 s (default)
/ 1 to 99 s
/ OFF
1
SHIFT +
Power On
2
(3 times)
5