3.7 Communications Function
43
1
2
3
4
5
6
7
8
9
10
11
Additional Functions
This instrument is equipped with an RS-232C interface-
based data transmission function. If this instrument is
connected to a personal computer, measurement data
can be transferred from this instrument to the computer
where it can be recorded and saved.
1. Install the software in the personal computer.
❖ Model 3856-01 or Model 3856-02 Instruction Manual
2. Set up the personal computer and the 3802-50 for
communications.
❖ See Section 4.1 Communications Settings (page 49)
When the software of the communications package is
used, set up the instrument as follows.
3. When using the 3856-02 communications package,
install the driver in the personal computer.
3.7 Communications Function
In order to use this function, one of the following
options is required. Purchase the option that is appro-
priate for your computer.
• When connecting to a serial port (D-sub 9-pin con-
nector) on the computer side
3856-01 COMMUNICATION PACKAGE (RS-232C)
• When connecting to a USB port on the computer side
3856-02 COMMUNICATION PACKAGE (USB)
❖ Model 3856-01 or Model 3856-02 Instruction Manual
Baud Rate 9600
Parity Check None
Data Length 8 bit
Response OFF
Data Output OFF
To Next Page
Loading...
