Hioki 3802-50 - Resistance Measurement

2.4 Resistance Measurement
23
1
2
3
4
5
6
7
8
9
10
11
Measurement
2.4.1 Resistance Measurement (Ω)
2.4 Resistance Measurement
Never apply voltage to the test leads. Doing so may
damage the instrument and result in personal injury.
To avoid electrical accidents, remove power from
the circuit before measuring.
1. Set the function switch.
2. To set manual range, press th
e
RANGE key.
(Auto range is the normal setting.)
❖ (34 page)
3. Connect the test leads to the test te
r-
minals.
4. Connect the test leads to the obje
ct
being tested.
5. Read the value displayed in th
e
main display.
RANGE
(AUTO off)
Ω
Black
<Example>
Red
Black
Red