Hioki 3802-50 - 4 Power on Options

47
1
2
3
4
5
6
7
8
9
10
11
Power On Options
The Power On Option Setting screen is used to set the following items.
Power On Options 4
Power On Option Description Ref Page
Baud Rate
Sets the communications speed.
(communications setting)
(49 page)
Parity Check
Sets parity checking.
(communications setting)
(49 page)
Data Length
Sets the data length.
(communications setting)
(50 page)
Response
Turns response ON/OFF.
(communications setting)
(50 page)
Data Output
Turns data output ON/OFF.
(communications setting)
(51 page)
Percentage Display
Toggles the percentage display
between 4 - 20mA and 0 - 20mA.
(52 page)
Minimum Frequency Sets the minimum frequency.
(53 page)
Buzzer Sound Sets the buzzer sound.
(54 page)
Decibel Display Toggles between dBm and dBV.
(55 page)
Temperature Display Selects the temperature display.
(57 page)
Refresh Hold Sets the refresh hold function. (58 page)
Auto Power Save
Sets the time until the auto power
save function is activated.
(59 page)
Display Backlight
Sets the time until the display
backlight turns off automatically.
(60 page)
Reference Imped-
ance
Sets the reference impedance.
(61 page)
Reset Resets this instrument.
(62 page)