Hioki 3802-50 - Capacitance Measurement

2.7 Capacitance Measurement
27
1
2
3
4
5
6
7
8
9
10
11
Measurement
2.7 Capacitance Measurement
Never apply voltage to the test leads. Doing so may
damage the instrument and result in personal injury.
To avoid electrical accidents, remove power from
the circuit before measuring.
1. Set the function switch.
2. If you want to change the rang
e,
press the RANGE key.
(Normally, manual range is used.)
❖ (34 page)
3. Connect the test leads to the test te
r-
minals.
4. Connect the test leads to the obje
ct
being tested.
5. Read the value displayed in th
e
main display.
The sample rate for the 99.99 mF range
is
0.01 times/second. It may take as long a
s
two minutes before the measured value i
s
displayed.
This instrument measures capacitance b
y
the charge-discharge method. on
the display indicates that the capacitor is
charging ( ) / discharging ( ).
<Example>
Black
Red
RANGE
(AUTO off)