What to do if Hioki 3801-50 Multimeter cannot measure electric current?
If you're unable to measure electric current with your Hioki Multimeter, try replacing the fuse. Also, perform a continuity check to inspect the test leads. If the test leads are damaged, replace them.
Why does Hioki Multimeter screen shut off after a few moments?
If the screen of your Hioki Multimeter shuts off after a few moments, you can try replacing the battery. Also, check the auto power save setting.
How to fix a blank screen on Hioki 3801-50?
If the screen of your Hioki Multimeter is blank, replace the battery.
What to do if function switch and screen display do not match on Hioki 3801-50 Multimeter?
If the position of the function switch and the screen display do not match on your Hioki Multimeter, open the case of the unit and confirm that the function switch on the case and the indented portion of the switch on the circuit board are both in the OFF position.
General| Type | Digital Multimeter |
|---|---|
| Display | LCD |
| Max AC Voltage | 600 V |
| Max DC Voltage | 600 V |
| Max AC Current | 10 A |
| Max DC Current | 10 A |
| Resistance Measurement | Yes |
| Frequency Measurement | Yes |
| Temperature Measurement | Yes |
| DC Voltage Range | 600 mV to 600 V |
| DC Current Range | 600 μA to 10 A |
| AC Current Range | 600 μA to 10 A |
| Resistance Range | 600 Ω to 60 MΩ |
| Display Count | 6000 |
| Operating Temperature | 0 °C to 40 °C |
| Measurement Functions | AC Voltage, DC Voltage, AC Current, DC Current, Resistance, Capacitance, Frequency, Temperature |
| Battery Life | approximately 200 hours |
| Measurement Category | CAT IV 600 V |
| Weight | Approx. 340g |
Procedure for verifying instrument condition and ensuring no damage from storage or shipping.
Precautions for safe measurement, instrument handling, and test lead care.
Procedure for inspecting the instrument before initial use to ensure proper operation.
Detailed steps for measuring AC and DC voltages accurately.
Instructions for safely measuring DC and AC current with the instrument.
Steps for measuring resistance (Ω) and conductance (nS).
Procedure for performing a continuity test.
How to measure frequency and use the frequency counter.
Alerts for terminal misconnections and overload conditions.
Details measurement functions, output functions, display method, and physical attributes.
Provides detailed accuracy specifications for various measurement ranges and types.
Guides users on diagnosing and resolving common operational problems.
Steps for safely replacing internal fuses with correct specifications.
To Next Page
