2
Safety Information
Safety Symbols
This manual contains information and warnings essential
for safe operation of the instrument and for maintaining it
in safe operating condition. Before using it, be sure to
carefully read the following safety precautions.
This instrument is designed to comply with IEC
61010 Safety Standards, and has been thoroughly
tested for safety prior to shipment. However, mis-
handling during use could result in injury or death,
as well as damage to the instrument. Be certain that
you understand the instructions and precautions in
the manual before use. We disclaim any responsibil-
ity for accidents or injuries not resulting directly
from instrument defects.
In the manual, the symbol indicates par-
ticularly important information that the user
should read before using the instrument.
The symbol printed on the instrument
indicates that the user should refer to a corre-
sponding topic in the manual (marked with
the symbol) before using the relevant
function.
Indicates that dangerous voltage may be
present at this terminal.
Indicates a double-insulated device.
Indicates a grounding terminal.
Indicates DC (Direct Current).
Indicates AC (Alternating Current).
Indicates DC (Direct Current) or AC (Alternat-
ing Current).
To Next Page
Loading...
