Hioki 3801-50 - Resistance and Conductance Measurement

2.2 Voltage Measurement
19
1
2
3
4
5
6
7
8
9
10
11
Measurement
2.2 Voltage Measurement
• Note that the instrument may be damaged if voltage or
current the measurement range.
• When the power is turned off, do not apply voltage or
current to the measurement terminal. Doing so may
damage the instrument.
1.
Set the function switch.
V : For measuring voltages above 1 V
mV: For measuring voltages below 1 V
If you are not sure of the voltage to be me
a-
sured, set the function switch to "V".
2. Use the SHIFT key to select eith
er
DC, AC, or AC+DC.
3. To set manual range, press th
e
RANGE key. (Auto range is the no
r-
mal setting.)
❖ (38 page)
4. Connect the test leads to the test te
r-
minals.
(DC)
(AC)
(AC+DC
)
SHIFT
<Example>
When ACV is selected
V
or mV
AC DC
AC+DC
RANGE
Black
Red
(AUTO off)