28
2.8 Frequency Measurement
2.8.1 Frequency Measurement
In order to display the frequency while measuring voltage
or current, press the Hz key or the DUAL key.
❖ See Section 2.2 Voltage Measurement (page 19)
❖ See Section 2.3 Current Measurement (page 21)
❖ Setting method of minimum frequency:
See Chapter 4 Power On Options (page 51)
Pressing the RANGE key changes the parameter range on
the main display.
2.8 Frequency Measurement
• Note that the instrument may be damaged if voltage or
current the measurement range.
• When the power is turned off, do not apply voltage or
current to the measurement terminal. Doing so may
damage the instrument.
• Note that zero is displayed if a frequency signal that
exceeds the frequency measurement range is mea-
sured.
DUAL
Frequency on sub
display
Hz
Frequency on main
display
The bar graph conforms with voltage measurement or
current measurement.
To Next Page
Loading...
