Hioki 3801-50 - Data Length Setting; Response ON;OFF Setting

54
4.1 Communications Settings
4.1.3 Data Length Setting
4.1.4 Response ON/OFF Setting
If response is turned on, this instrument returns all of the
characters received.
34
1. In order to display the Power On
Option setting screen, hold dow
n
the SHIFT key while turning th
e
function switch.
2. Press the
HOLD key twice to di
s-
play the Data Length settin
g
screen.
3. Press the
RANGE key or the DUA
L
key to select the data length.
4. Confirm the selection by pressin
g
the Hz key.
5. Hold down the
SHIFT key to ent
er
the measurement screen.
Otherwise, turn the function switc
h
to OFF to finish setup.
8 bit (default)
/ 7 bit
1
SHIFT +
Power On
2
(twice)
5
34
1. In order to display the Power On
Option setting screen, hold dow
n
the SHIFT key while turning th
e
function switch.
2. Press the
HOLD key 3 times to di
s-
play the Response setting screen
.
3. Press the RANGE key or the DUA
L
key to select the response settin
g.
4. Confirm the selection by pressin
g
the Hz key.
5. Hold down the
SHIFT key to ent
er
the measurement screen.
Otherwise, turn the function switc
h
to OFF to finish setup.
OFF (default)
/ ON
1
SHIFT +
Power On
2
(3 times)
5