66
4.12 Reset
This procedure resets the power on option settings to
their initial values.
4.12 Reset
34
1. In order to display the Power O
Option setting screen, hold dow
the SHIFT key while turning th
function switch.
2. Press the
REL key once to displa
the Reset screen.
3. Hold down the
Hz key to reset.
4. Hold down the
SHIFT key to ent
the measurement screen.
Otherwise, turn the function switc
to OFF to finish setup.
Default
1
SHIFT +
Power On
2
(once)
5
Power On Options Default Setting
Baud Rate 9600 bps
Parity Check None
Data Length 8 bit
Response OFF
Data Output OFF
Percentage Display 4-20 mA
Minimum Frequency 0.5 Hz
Buzzer Sound 2400 Hz
Decibel Display dBm
Thermocouple Type K
Temperature Display OFF
Refresh Hold OFF
Auto Power Save 15 min
Display Backlight 30 s
Reference Impedance 600 Ω
Reset
Default
To Next Page
Loading...
