6
Observe the following precautions to avoid electric
shock.
• Always verify the appropriate setting of the func-
tion selector before connecting the test leads.
• Disconnect the test leads from the measurement
object and terminals before switching the function
selector.
The terminals are not sufficiently separated. To
avoid electrocution, do not touch the terminals.
For safety reasons, when taking measurements, only use the
test lead provided with the instrument.
To avoid damage to the instrument, protect it from physical
shock when transporting and handling. Be especially careful
to avoid physical shock from dropping.
• To avoid corrosion from battery leakage, remove the
batteries from the instrument if it is to be stored for a
long time.
• After use, always turn OFF the power.
• To avoid breaking the cables, do not bend or pull them.
• The ends of the leads are sharp. Be careful to avoid injury.
Fit the protective pin cap when the product is not in use.
• Keep the cables well away from heat sources, as bare
conductors could be exposed if the insulation melts.
Measurement Precautions
Handling this Instrument
Handling the Test Leads
To Next Page
Loading...
