Hioki 3801-50 - Additional Functions; Auto Range Function

2.11 Temperature Measurement
33
1
2
3
4
5
6
7
8
9
10
11
Measurement
1. Select the thermocouple sensor (
K
or J).
❖ See Section 4.6 Thermocouple Type Settin
g
(page 60)
2. Set the function switch.
3. Use the SHIFT key to select the tem
-
perature display.
( ): Uses reference contact tempera
-
ture compensation according to
the instrument's internal temper
a-
ture sensor
( ) : No reference contact tem-
perature compensation (0°
C
reference)
4. Connect the temperature probe
to
the test terminals.
5. Connect the temperature probe
to
the object being tested.
6. Read the value displayed in th
e
main display.
K J
K J
0°C
SHIFT
<Example>
<
Example> K (J) is selected
TEMP
-
+
K
0°C
K