Need help?Do you have a question about the Hirschmann BRS40-0012 Series and is the answer not in the manual?
General| Number of Ports | 12 |
|---|---|
| Operating Temperature | -40°C to +70°C |
| Switching Technology | Store-and-forward |
| Protection Class | IP30 |
| Mounting Type | DIN Rail |
| Standards | IEEE 802.3, IEEE 802.3u, IEEE 802.3x |
| Device Type | Managed Industrial Ethernet Switch |
| Port Type | 10/100BASE-TX |
General safety advice for operating the device with electricity and proper handling.
Guidelines for using the product only for specified applications and according to technical specifications.
Defines requirements for qualified personnel to work on the device, including training and experience.
Instructions on how to ground the device before connecting other cables.
Specifies conditions for connecting electrical wires, including voltage-free and cable type.
Details requirements for signal contact connections, including voltage and current limitations.
Outlines prerequisites for connecting supply voltage, including voltage correspondence and cable diameter.
Overview of the BOBCAT Rail Switch family and their features.
Details power input voltage ranges and interface types like USB.
Details power supply options and connection information for characteristic value T.
Details power supply options and connection information for characteristic value F.
Describes the 10/100 Mbit/s twisted pair port, its support, and pin assignment.
Describes the 10/100/1000 Mbit/s twisted pair port, its support, and pin assignment.
Describes the 100 Mbit/s F/O port, its support, and delivery state.
Describes the 100/1000 Mbit/s F/O port and its supported standards.
Describes the 100/1000/2500 Mbit/s F/O port and its supported standards.
Covers the process of installing the device onto a DIN rail and grounding it.
Provides steps and prerequisites for mounting the device on a DIN rail.
Details how to ground the device via the dedicated ground screw.
Notes about connecting the supply voltage to the device casing.
Outlines options for configuring IP addresses and initial device setup.
Provides general specifications like weight, dimensions, mounting, and protection degree.
Lists electrical specifications for supply voltage with characteristic value T.
To Next Page