Need help?Do you have a question about the Hirschmann BRS20-0400 Series and is the answer not in the manual?
General| Number of Ports | 4 |
|---|---|
| Mounting Type | DIN Rail |
| Switching Technology | Store-and-Forward |
| Protection Class | IP30 |
| Protection Rating | IP30 |
| Device Type | Industrial Ethernet Switch |
| Operating Temperature | -40°C to +70°C |
| Input Voltage | 24 V DC |
| Jumbo Frame Support | Yes |
General safety guidelines for operating the device, including handling, maintenance, and component integrity.
Guidelines for using the product only for specified application cases and technical specifications.
Requirements for the installation location, including fire enclosure, access, and environmental conditions.
Specifies that only properly trained and experienced personnel should work on the device.
States that only authorized technicians may open the device casing.
Describes the connection of shielding ground for twisted pair cables to the ground connection.
Instructions for grounding the device via the ground screw before connecting other cables.
Lists mandatory requirements and restrictions for connecting electrical wires to the device.
Specifies requirements for connecting the signal contact, including voltage and current limitations.
Details prerequisites and requirements for connecting the device's supply voltage safely.
Provides an overview of the BOBCAT Rail Switch family and its features.
Explains how the device name and product code are formed from characteristics.
Details the physical layout of the device from different perspectives.
Describes the available options and requirements for connecting the device's power supply.
Details the types of Ethernet ports available and their specifications.
Explains the meaning of the LEDs and their indications for device and port status.
Covers the interfaces used for managing the device, such as signal contact and USB-C.
Instructions to verify all items are present and undamaged after delivery.
Steps for physically mounting the device on a DIN rail and establishing a proper ground connection.
Procedure for installing an SFP transceiver into the device's SFP slot.
Guidance on connecting power supply, signal contact, and digital input via terminal blocks.
Describes the process of starting up the device after connecting the supply voltage.
Recommendations for connecting data cables in environments with high electrical interference.
Guidance on using the inscription label for device identification, typically for IP address.
Outlines the options and procedures for configuring initial IP addresses and network settings.
Step-by-step instructions for safely removing an SFP transceiver from the device.
Procedure for safely disconnecting and removing the device from its DIN rail mounting.
Provides general specifications for the device, including weight, dimensions, mounting, and protection.
Details the voltage ranges and specifications for different supply voltage configurations.
Lists the maximum power consumption and power output for various device models.
Specifies technical data for the signal contact, including connection type and nominal values.
Provides technical specifications for the digital input, including voltage ranges and current limits.
Outlines the environmental conditions (temperature, humidity, air pressure) for device operation.
Specifies the environmental conditions recommended for storing the device.
Visual representation of the device dimensions with measurements in mm and inches.
Details the device's stability performance according to various environmental and application standards.
Presents data on the device's EMC interference emissions and immunity levels.
Specifies the network range and performance characteristics for different types of Ethernet transceivers.
Information on temperature derating required when using specific SFP transceivers.
Lists common accessories available for the device, such as adapters and software.
Details the available Fast Ethernet SFP transceivers and their order numbers.
Lists the available Gigabit Ethernet SFP transceivers and their corresponding order numbers.
Provides a list of 2.5 Gigabit Ethernet SFP transceivers and their order numbers.
Catalog of bidirectional Fast Ethernet SFP transceivers with order numbers.
Catalog of bidirectional Gigabit Ethernet SFP transceivers with order numbers.
To Next Page