To Next PageTo Next Page
Need help?Do you have a question about the Hirschmann MACH102 Series and is the answer not in the manual?
General| Product Type | Industrial Ethernet Switch |
|---|---|
| Jumbo Frame Support | Yes, up to 9.6 KB |
| Switching Technology | Store-and-Forward |
| Protection Class | IP30 |
| Storage Temperature | -40°C to +85°C |
| Protocols Supported | IEEE 802.3 |
| Standards Compliance | IEEE 802.3 |
| Humidity | 10% to 95% (non-condensing) |
Guidelines for proper use of the device and components.
Requirements and precautions for supply voltage connections.
Connection of twisted pair lines to protective conductor.
Rules for device housing and ventilation.
Operating temperature and humidity limits.
Requirements for qualified personnel.
Compliance with safety standards.
Precautions for electrostatic sensitive components.
List of EU directives the device complies with.
Statement regarding FCC Part 15 rules.
Disposal instructions for electronic waste.
Lists manuals and HiVision software features.
Explains symbols used in the manual.
General introduction to MACH102 industrial Ethernet switches.
Information on different switch variants and modular design.
Explanation of the HIPER-Ring redundancy concept.
Features of the basic MACH102 devices.
Specifications of Gigabit Ethernet combo ports.
Specifications of Fast Ethernet ports.
Details on 8-port basic devices.
Overview of port types and media module options.
Details on fixed 8-port devices.
Details on fixed 24-port devices.
How media modules interface with the LAN.
Overview of available media module types.
Details of the 8 x 10/100 Mbit/s RJ45 media module.
Details of the PoE-enabled 8 x 10/100 Mbit/s RJ45 module.
Details of the 8 x 100BASE-FX Multimode media module.
Details of the 8 x 100BASE-FX Singlemode media module.
Details of the 8 x 100 Mbit/s SFP slot media module.
How SFP modules provide F/O ports.
List of Fast Ethernet SFP modules.
Specifications for Fast Ethernet SFP modules.
Specifications for Gigabit Ethernet SFP modules.
Steps for unpacking and verifying device components.
Procedure for installing pluggable media modules.
Steps for inserting SFP transceivers into slots.
Monitoring device status via the signal contact.
Conditions reported by the FAULT signal.
How to connect signal lines to the terminal block.
Visual representation of device dimensions.
Installation guidelines for flat surface mounting.
Installation guidelines for 19" switch cabinets.
Steps for mounting the device in a 19" cabinet.
Instructions for mounting the device on a wall.
Input voltage range for basic MACH102 devices.
Information on redundant power supply options.
Power connection for non-redundant devices.
Power connection for redundant supply devices.
Warning for electric shock when connecting PoE.
Warning for fire hazard when handling PoE.
Connecting supply voltage using a 3-pin terminal block.
How to start device operation by connecting voltage.
Details on 10/100 Mbit/s twisted pair port.
Details on 10/100 Mbit/s PoE port.
Information provided by device status LEDs.
Methods for configuring IP addresses on the device.
Default IP address, password, and other parameters.
Pin assignment for the USB interface.
Terminal settings for V.24 serial interface.
Instructions for detaching the device from mounting.
Procedure for removing media modules.
Procedure for removing SFP transceivers.
Specifications including dimensions, weight, power, and environment.
Standards and levels for EMC interference immunity.
Standards for EMC interference emission.
Power and temperature specs for basic devices.
Power and temperature specs for media modules.
Power, temp, order numbers for Fast Ethernet SFPs.
Power, temp, order numbers for Gigabit Ethernet SFPs.
Power and temp specs for SFP modules.
Overview of V.24, USB, combo, and twisted pair interfaces.
List of items included with each device model.
List of available Fast Ethernet SFP modules.
List of available Gigabit Ethernet SFP modules.
List of other accessories and their order numbers.
References to relevant industry norms and standards.
Description of IEEE 802.1 standards supported.
Description of IEEE 802.3 standards supported.
Information on how to get technical support and contact details.
Details on training and consulting services offered.
