Need help?Do you have a question about the Hirschmann MACH 1000 and is the answer not in the manual?
General| Model | MACH1000 |
|---|---|
| Layer | Layer 2 |
| Storage Temperature | -40°C to +85°C |
| Type | Managed Ethernet Switch |
| Port Type and Speed | 10/100/1000 Mbps (Gigabit Ethernet) |
| Power Supply | 24 V DC or 100-240 V AC |
| Operating Temperature | -40°C to +70°C |
| Mounting | DIN Rail |
| Power Consumption | Varies depending on model and configuration |
| Approvals | CE, UL, cUL |
| MAC Address Table | 8K |
| Jumbo Frame Support | Yes |
| Dimensions | Varies depending on model |
| Weight | Varies depending on model |
| Standards Compliance | IEEE 802.3, IEEE 802.3u, IEEE 802.3x, IEEE 802.1D, IEEE 802.1w, IEEE 802.1s, IEEE 802.1Q, IEEE 802.1p |
Enables monitoring, software loading, updates, and system control via V.24.
Text-based interface for device configuration via local or remote connections.
Graphical interface for device operation via a standard web browser.
Step-by-step guide to configuring IP parameters using the Command Line Interface.
Method for assigning IP parameters using the HiDiscovery protocol over Ethernet.
Manual procedure for updating device software via the AutoConfiguration Adapter.
Describes the automatic device software update process using the AutoConfiguration Adapter.
Overview of steps to maximize device protection against unauthorized access.
How to set and manage passwords for SNMP access to the device.
Explains how to enable or disable Telnet, Web, and SSH access services.
Describes port-based network access control using IEEE 802.1X for enhanced security.
Mechanism to prevent time-critical data traffic disruption during high network load.
Benefits and configuration of VLANs for network segmentation and management.
Provides an overview of the device's overall condition and operational status.
Mechanism to detect and eliminate duplicate IP address assignments in the network.
Instructions to install and configure a DHCP/BOOTP server for device setup.
Steps to prepare and set up a TFTP server for device software updates.
Steps to generate and upload SSH keys for secure remote access.
To Next Page
