Network Load Control
128
8.2
Multicast Application
Basic Configuration
Release
6.0
07/2010
8.2.4 Setting IGMP Snooping
îš„ Operation
îš„ Settings for IGMP Querier and IGMP
With these frames you can enter global settings for the IGMP settings and
the IGMP Querier function.
Prerequisite: The IGMP Snooping function is activated globally.
îš… Select the Switching:Multicast:IGMP dialog.
The “Operation” frame allows you to enable/disable IGMP Snooping
globally for the entire device.
If IGMP Snooping is disabled, then
X the device does not evaluate Query and Report packets received,
and
X it sends (floods) received data packets with a Multicast address as
the destination address to all ports.
To Next Page
Loading...
Need help?
General
