Need help?Do you have a question about the Hirschmann PowerMICE MM3-4FXM2 and is the answer not in the manual?
General| Type | Managed Ethernet Switch |
|---|---|
| Switching Technology | Store-and-forward |
| VLAN | Yes |
| Redundancy functions | MRP |
| Weight | 500 g |
| Standards | IEEE 802.3, IEEE 802.1D, IEEE 802.1Q, IEEE 802.1w |
Provides crucial notices for safe device operation and familiarization before installation or use.
Outlines safety requirements and specifications for connecting the device to power sources.
A critical safety warning against opening the device while it is powered on to prevent hazards.
Covers electrical shock hazards and equipment overheating precautions related to the device housing.
Provides overarching safety guidelines for operating electrical equipment and electrical safety.
Introduces the PowerMICE series, comprising basic and media modules for industrial communication.
Details the functions and capabilities of the MS4128 basic module in the PowerMICE series.
Explains the role of media modules in providing LAN interfaces and lists their interface-specific functions.
Provides a general overview of the installation process and lists the sequence of steps required to set up the switch.
Guides users through the physical installation of the PowerMICE device and its components.
Explains the procedure for installing and removing media modules into the basic module.
Provides instructions on how to properly insert SFP modules into their slots for optical connectivity.
Explains how to configure the basic module's functionality using its 6-pin DIP switch.
Guides on connecting the MM22-T1T1T1T1 PoE media module, including power supply requirements.
Explains how to connect terminal blocks for power supply and signal contacts to the device.
To Next Page