Installation BRS20/30/40/50
Release
02
11/2018
77
9 Underlying technical standards
The device has an approval based on a specific standard exclusively if the
approval indicator appears on the device casing.
If your device has a shipping approval according to DNV GL, you find the
approval mark printed on the device label. You will find out whether your
device has other shipping approvals on the Hirschmann website at
www.hirschmann.com in the product information.
The device generally fulfills the technical standards named in their current
versions.
Name
ATEX (2014/34/EU) ATEX – Intended use of equipment and protection systems in
potentially explosive areas.
ANSI/UL 121201 Nonincendive Electrical Equipment for Use in Class I and II,
Division 2 and Class III, Divisions 1 and 2 Hazardous
(Classified) Locations
DNVGL-CG-0339 Environmental test specification for electrical, electronic and
programmable equipment and systems.
FCC 47 CFR Part 15 Code of Federal Regulations
NEMA TS 2 Traffic Controller Assemblies with NTCIP Requirements
(environmental requirements)
RCM Australian Regulatory Compliance Mark (RCM)
Australian Radiocommunications Standard 2008,
Radiocommunications Act 1992
UL/IEC 61010-2-201 Safety for Control Equipment
EN 50121-4 Railway applications – EMC – Emission and immunity of the
signaling and telecommunications apparatus (Rail Trackside)
EN 55032 Electromagnetic compatibility of multimedia equipment –
Emission Requirements
EN 62368-1 Equipment for audio/video, information and communication
technology - Part 1: safety requirements
EN 61000-6-2 Electromagnetic compatibility (EMC) – Part 6-2: Generic
standards – Immunity for industrial environments
EN 61131-2 Programmable controllers – Part 2: Equipment requirements
and tests
IEEE 802.3 Ethernet
Table 39: List of the technical standards
To Next Page
Loading...
Need help?
General
