Hirschmann HC3901 - 5. OPERATION METHOD and PROCESS

11
5. OPERATION METHOD and PROCESS (only for example)
When controller and console of the system is powered on, the data initialization automatically starts.
This progress cannot be directly observed, but a welcoming display (Logo display) will appear at the
console to present the manufacturer and the initializing status.
The crane drivers shall be very familiar with the operation of LMI system and correctly adjust it
before start to work.
Power on
Operate the crane to work.
Choose the same Reeving by
Reeving buttons
N
O
Self Checking System
Confirm OM
Choose the same OM by OM
buttons
N
O
Look up the error code list to solve
YES
Is the displayed
OM the same as
the actual one?
Is the showed
Reeve the same
as the actual
Error or Not?