© 2009 Hirschmann Automation and Control GmbH · Branch Office Ettlingen · eMail: info.ecs@hirschmann.de · www.hirschmann.com 2
24 183 69 1012e (Generic) / 2009-02-26 / Rev. 01 / rk.
TABLE OF CONTENTS
1. General information ........................................................................... 3
2. Important notes .................................................................................. 5
3. Sensor calibration.............................................................................. 6
3.1 Zero-setting the pressure signals......................................................... 8
3.2 Zero-setting the slewing signal........................................................... 10
3.3 Length sensor calibration procedure.................................................. 12
3.4 Angle sensor calibration procedure.................................................... 15
4. Troubleshooting............................................................................... 19
4.1 General information............................................................................ 19
4.2 Error code list ..................................................................................... 20
Revision History ................................................................................. 26
Appendix: Wiring, Drawings, Spare Parts
The manufacturer reserves the right to modify the contents of this manual without notice. Hirschmann will not be liable for
errors contained in this manual or for incidental or consequential damages in connection with the furnishing, performance, or
use of this manual. This document contains proprietary information, which is protected by copyright, and all rights are
reserved. No part of this document may be photocopied, reproduced, or translated to another language without the prior
written consent of Hirschmann. Hirschmann reserves proprietary rights to all drawings, photos and the data contained
therein. The drawings, photos and data are confidential and cannot be used or reproduced without the written consent of
Hirschmann. The drawings and/or photos are subject to technical modification without prior notice.
All information in this document is subject to change without notice..
To Next Page
Loading...
