Switching
70
4.3
Multicasts
RM Web L2B
Release
5.3
05/2012
Note: If the device is incorporated into a HIPER-Ring, you can use the
following settings to quickly reconfigure the network for data packets with
registered Multicast destination addresses after the ring is switched:
Switch on the IGMP Snooping on the ring ports and globally, and
activate “IGMP Forward All” per port on the ring ports.
Static Query Port The device sends IGMP report
messages to the ports at which it
receives IGMP queries (default
setting). This column allows you to also
send IGMP report messages to: other
selected ports (enable) or connected
Hirschmann devices (automatic).
Prerequisite: In the
Switching:Multicasts:Global
Setting dialog, the IGMP Snooping
mode is selected.
enable,
disable,
automatic
disable
Learned Query
Port
Shows at which ports the device has
received IGMP queries if “disable” is
selected in “Static Query Port”.
Prerequisite: The IGMP Snooping
function is activated globally.
Yes
No
-
Parameter Meaning Value range Default setting
Table 14: Settings per port
To Next Page
Loading...
Need help?
General
