QoS/Priority
72
5.1
Global
RM Web L2B
Release
5.3
05/2012
5.1 Global
With this dialog you can:
enter the IP-DSCP value for management packets in the range 0 to 63
(default setting: 0 (be/cs0)).
In order for you to have full access to the management of the device, even
when there is a high network load, the device enables you to prioritize
management packets.
In prioritizing management packets (SNMP, Telnet, etc.), the device
sends the management packets with priority information.
Note the assignment of the IP-DSCP value to the traffic class (see
table 19).
Note: Certain DSCP values have DSCP names, such as be/cs0 to cs7
(class selector) or af11 to af43 (assured forwarding) and ef (expedited
forwarding).
To Next Page
Loading...
Need help?
General
