To Next PageTo Next PageHow to fix the indoor fan motor fault in Hisense Air Conditioner?
If you are experiencing an indoor fan motor fault with your Hisense Air Conditioner, try the following: * Reconnect the fan motor cable. * Replace the fan motor cable. * Replace the fan motor. * Replace the indoor control board. * Check the indoor fan to ensure it can run normally.
What to do if my Hisense 4AMW-105U4RAA has cooling freezing protection or heating overload?
To address cooling freezing protection or heating overload issues with your Hisense Air Conditioner, take these steps: * Check the indoor fan, indoor fan motor, and evaporator to ensure they are working correctly. * Clean the filter. * Check the volume control valve and duct length. * Set the fan speed to high. * Reinstall the indoor unit, referring to the user manual to adjust the distance between the unit and the wall or ceiling.
What to do if my Hisense 4AMW-105U4RAA turns off for low pressure protection?
To resolve a low-pressure switch protection issue or unit shutdown due to low-pressure protection in your Hisense Air Conditioner, consider the following: * Reconnect the wiring of the low-pressure switch. * Replace the low-pressure switch. * Check for refrigerant leaks at the welding points and add refrigerant if needed. * Replace the expansion valve. * Replace the outdoor control board.
What to do if my Hisense 4AMW-105U4RAA turns off for high pressure protection?
To address a high-pressure switch issue or unit shutdown due to high-pressure protection in your Hisense Air Conditioner, try the following: * Reconnect the wiring to the high-pressure protector. * Replace the high-pressure protector. * Replace the outdoor control board.
What to do if my Hisense 4AMW-105U4RAA shows compressor overheat protector device?
If your Hisense Air Conditioner's compressor is overheating, you can try the following steps: 1. Reconnect the wiring of the overload protector. 2. Replace the overload protector. 3. Check for leakage at the welding points and recharge the refrigerant if necessary. 4. Add refrigerant. 5. Replace the expansion valve. 6. Replace the outdoor control board.
How to fix communication fault between indoor and outdoor unit of Hisense Air Conditioner?
To resolve communication issues between the indoor and outdoor units of your Hisense Air Conditioner, try the following: * Reconnect the connection cable, referring to the wiring diagram. * Reconnect the communication cable. * Replace the communication cable. * Replace the indoor or outdoor control board. * Check the communication circuit, adjusting the DIP switch and short-circuit fuse. * Ensure you are using a suitable communication cable, referring to the user manual.
What to do for drainage protection in Hisense 4AMW-105U4RAA Air Conditioner?
To troubleshoot a drainage protection issue with your Hisense Air Conditioner, follow these steps: 1. Check the drain hose for blockages or excessive height. 2. Inspect the water pump and replace it if it's faulty. 3. Reconnect the cable of the water level switch, referring to the wiring diagram. 4. Replace the water level switch. 5. Replace the control board.
General| Brand | Hisense |
|---|---|
| Model | 4AMW-105U4RAA |
| Category | Air Conditioner |
| Language | English |
Key compressor and technology features for efficient air conditioning.
Details the types of outdoor units available in different configurations.
Explains the coding system used to identify model specifications and features.
Specifies the operating voltage, imbalance, and temperature ranges for the unit.
Visual representation of outdoor units with their capacities.
Charts showing outdoor unit capacity based on indoor and outdoor temperatures.
Factors for adjusting capacity based on pipe length and height difference.
Modifies heating capacity based on defrosting operation impact.
Diagrams illustrating the electrical connections for different model series.
Detailed view and labeling of the electronic control board components.
Instructions and parameters for checking outdoor unit running status.
Illustrates standard wiring connections between indoor and outdoor units.
Provides resistance values for temperature sensors at various temperatures.
Requirements for pipe length and height difference for optimal performance.
Guidelines on when and how to install oil traps in refrigerant piping.
Procedures for adding refrigerant based on piping length.
Covers anti-freeze, overload, and discharge temperature protection mechanisms.
Explains oil return control, available operation modes, and mode conflict.
Explains how to interpret fault codes displayed on the control board.
Lists fault codes for outdoor and indoor units with descriptions and solutions.
Details procedures for checking the refrigerant system using pressure gauges.
Identifies components like fan motors and compressors and their checks.
