5
Follow the instructions for correct installation of the washing
machine and connection to the water and power mains (see
chapter »INSTALLATION AND CONNECTION«).
Connection to water and power supply has to be executed by an
adequately trained technician or expert.
Any repair and maintenance pertaining to safety or performance
should be done by trained experts.
To avoid danger, a damaged power cord may only be replaced
by the manufacturer, a service technician, or an authorized
person.
Before connecting the washing machine to the power mains,
wait for at least 2 hours until it reaches room temperature.
This product must be serviced by an authorized Service
Center, only use approved spare parts by authorized
manufacturers.
Under no circumstances should you attempt to repair the
appliance yourself. Repairs carried out by inexperienced
persons may cause injury or more serious malfunctioning.
Refer to your local Service Center, and always insist on
genuine spare parts.
In case of incorrect washing machine connection, incorrect use,
or servicing by an unauthorized person, the user shall bear the
cost of any damage as such damage shall not be covered by
warranty.
The washing machine may not be connected to the power mains
using an extension cord.
Do not connect the washing machine to power mains using an
external switching device such as a programme timer, or connect
it to power mains that is regularly switched on and off by the
power supply provider.
To Next Page
Loading...
Need help?
General