What does F54 error mean on Hisense HV643D60UK?
The F54 error on your Hisense Dishwasher indicates overfilling water. Turn off the water tap. To avoid water leakage outside the dishwasher, do not remove the plug from the wall socket until the water tap on the supply line has been turned off!
Why my Hisense HV643D60UK door cannot close?
Your Hisense Dishwasher door might not close because the baskets are not correctly positioned. Check that the baskets are correctly positioned horizontally. Also, the door lock might not click into place and lock. Check the door lock and open the door if it does not click.
What to do if Hisense HV643D60UK control panel does not react?
If the control panel of your Hisense Dishwasher does not react when pressed: - Wait a moment and try again if you have pressed the control panel too soon after opening the door. - Open the door, as the control panel only reacts when the door is open. - Clean the control panel with a dry or slightly damp cloth if there is dirt on it.
How to remove grease deposits in Hisense HV643D60UK?
To remove grease deposits in your Hisense Dishwasher, select a program with a high temperature to dissolve grease on very dirty dishes, such as Intensive 70°. Alternatively, run a self-cleaning program if low temperature programs have been selected for a prolonged period.
How to get rid of bad odour in Hisense HV643D60UK?
To eliminate bad odors in your Hisense Dishwasher: - Clean around the seals and in corners with a washing-up brush and low foaming cleaner. - Run a program with a high temperature once or twice a month, or run a self-cleaning program if low temperature programs have been selected for a prolonged period.
How to fix spots on stainless steel or silver in Hisense Dishwasher?
To fix spots on stainless steel or silver in your Hisense Dishwasher: - Rinse off foodstuff like mustard, mayonnaise, lemon, vinegar, salt and dressings from dishes if not starting the dishwasher immediately. Consider using 1h 65° with the Speed wash option. - Separate dishes made from different metals, such as silver, stainless steel, and aluminum. - Adjust the rinse aid dosage setting. - If the TAB setting is activated and you're using all-in-one detergent with insufficient drying effect, switch to separate detergents or deactivate the TAB setting and top up with salt and separate rinse aid. - Top up the salt compartment with salt. - Adjust the water softener setting. - Check that the salt compartment lid is properly tightened.
How to fix dishes not dry enough in Hisense HV643D60UK Dishwasher?
To improve drying in your Hisense Dishwasher: - Activate the Auto Dry setting. - Fully load the dishwasher. - Top up with rinse aid or increase the rinse aid dosage setting. - If the TAB setting is activated and you're using all-in-one detergent with insufficient drying effect, switch to separate detergents or deactivate the TAB setting and top up with salt and separate rinse aid.
What to do if water remains in my Hisense Dishwasher?
If water remains in your Hisense Dishwasher: - The filter may be clogged. Clean the filter. - The filter may not be fitted correctly. Ensure it is correctly fitted. - There may be debris in the drainage pump. Clean the drainage pump. - The drainage pump stop may be missing. Check that the yellow drainage pump stop is in place. - There may be a kink in the drainage hose. Ensure the hose is free from kinks and sharp bends. - The drainage hose may be blocked. Disconnect the drainage hose and check for blockages, ensuring the connection has an inner diameter of at least 14 mm.
Why are the dishes not clean in my Hisense HV643D60UK?
The dishes might not be clean due to several reasons: - The spray arms may be blocked by dishes. Check and ensure they can rotate freely. - The spray arm holes or bearings may be blocked. Clean the spray arms. - The selected dishwashing program may be unsuitable. Select a program with a high temperature to dissolve grease, such as Intensive 70°. - The detergent dosage may be incorrect. Adjust the dosage according to water hardness. - The detergent may be old. Use fresh detergent and avoid large packages.
Explains the functions of buttons, display, and indicator lights on the control panel.
Details how to choose and activate washing programs and available options.
Essential safety guidelines for operating the dishwasher and handling it safely.
Explains how the overflow guard operates and the F54 error code.
Guidance on winter storage, packaging materials, and proper disposal procedures.
Explains water hardness, how to check it, and set the water softener.
Details how water softener regeneration affects energy and water consumption.
Instructions for refilling the rinse aid compartment for better drying results.
Instructions for refilling the salt compartment for water softening.
Advice on loading, rinsing, program selection, and water connection for efficiency.
Explains how proper loading impacts washing performance and drying.
Details on using the upper/lower baskets and the top cutlery tray effectively.
How to raise and lower the upper basket to accommodate different dish heights.
How to fold down plate supports for easier loading of pots and bowls.
Guidance on detergent types, dosage, and compartment usage.
Advice for using combined detergents and related settings.
Details on turning the dishwasher on/off and selecting programs and options.
Explains the available wash programs like Eco, Auto, and Intensive.
Explains Delayed Start and Speed Wash options for programs.
How to start, stop, and pause the dishwasher program.
Procedures for interrupting cycles, adding dishes, and handling power outages.
How to know when a program finishes and tips for optimal drying.
Adjusting beep volume and rinse aid dosage levels.
Setting water softener and all-in-one detergent options.
Enabling Auto Dry for better drying and viewing error messages.
Restoring default settings and exiting the settings menu.
Instructions for refilling rinse aid and salt compartments.
Steps for cleaning the filter and spray arms to ensure optimal performance.
Cleaning the dishwasher exterior, seals, and running the self-clean cycle.
Steps to clear blockages in the drainage pump to resolve water outlet faults.
Steps to clear blockages in the inlet hose filter to resolve water inlet faults.
Lists common error codes (F10-F67) and their corresponding remedies.
Troubleshooting panel non-responsiveness and door closure problems.
Steps for when the dishwasher does not start.
Solutions for when the dishwasher doesn't start or dishes aren't clean.
Problems arising from incorrect loading and spots on metal or other dishes.
Solutions for film, spots, detergent residue, water retention, and bad odors.
Troubleshooting rattling sounds and water remaining in the dishwasher.
Solutions for grease buildup and dishes not drying completely.
Crucial safety advice and site preparation for installing the dishwasher.
Instructions for connecting the drainage and water inlet hoses correctly.
Information on connecting the dishwasher to the electricity supply.
Key dimensions, weight, water pressure, and power ratings.
Sources for product details, energy labelling, and testing information.
General| Door color | Black |
|---|---|
| Water fill | Cold, Hot |
| Cord length | 1.73 m |
| Control type | Touch |
| Display type | LED |
| Product size | Full size (60 cm) |
| Tub material | Stainless steel |
| Inlet hose length | 1.75 m |
| Number of baskets | 3 basket(s) |
| Custom panel-ready | Yes |
| Outlet hose length | 1.5 m |
| Appliance placement | Fully built-in |
| Door panel included | No |
| Cutlery compartment type | Drawer |
| Baskets adjustable placement | Upper |
| Cycle time | 175 min |
| Noise level | 44 dB |
| Drying system | Residual heat |
| Delay start (max) | 24 h |
| Dishwashing programs | 60min 65°C, Auto 45-65°C, Delicate 40°C, Eco 50°C, Hygiene 70°C, Intensive 70°C |
| Number of spray zones | 5 |
| Number of place settings | 16 place settings |
| Number of washing programs | 6 |
| Number of temperature settings | 7 |
| Cycle time (quick washing program) | 15 min |
| Country of origin | Slovenia |
| Package depth | 665 mm |
| Package width | 640 mm |
| Package height | 880 mm |
| Package weight | 34500 g |
| Current | 10 A |
| Connected load | 1900 W |
| Power plug type | Type G |
| AC input voltage | 220-240 V |
| AC input frequency | 50 Hz |
| Energy efficiency scale | A to G |
| Power consumption (left-on) | 0.49 W |
| Water consumption per cycle | 11 L |
| Energy consumption per cycle | 0.85 kWh |
Weight and Dimensions| Depth | 555 mm |
|---|---|
| Width | 598 mm |
| Height | 816 mm |
| Weight | 32500 g |
| Installation compartment width | 600 mm |
| Installation compartment height | 820 mm |
| Installation compartment height (max) | 900 mm |
To Next Page