Hisense LTDN40K320UHK - Using Your TV for the First Time; Initial Setup and Operation

10
1
Turning the TV On or Off
2
Changing the Channel and Volume
3 Adjusting the machine settings
【ＮＯＴＥＳ】
·
In order to save power consumption, set the TV in Standby mode if you do not
watch TV for a short time, if you do not watch TV for a very long time, shut down
the main power of the TV.
·
If the TV is turned off , to turn it on again, please wait 5 seconds at least in case the
abnormal phenomena occurred.
·
When using an external keyboard, in the default system Sogou input method, follow
the English switch by "shift + Space" keys.
Using the TV for the First Time
7
·
Use an AC cord to connect the TV's Power input jack to 220V AC outlet.
·
Press the Power button on the TV set. When the TV is on, press the Standby
button
on the remote control, and the TV will enter Standby mode. Press this
button again, and you can watch TV normally.
·
Press the Power button
again to turn off the TV.
·
Press the CH+ / CH- buttons on the remote control to change the channel.
·
Press the +/ - buttons on the remote control to adjust the volume.
Menu is a easy interactive window to achieving most of the basic functions of the TV.
·
Press the
button to enter the settings interface, you can adjust the various
settings.
·
In each level of menu, you can select the following operations according to different
menus:
Press
▲
/
▲
buttons or ▲/
▲
buttons to select an item
Press the OK button to conrm operation or enter the submenu.
Press the
▲
/
▲
buttons to adjust the value
Press ▲/
▲
buttons to select the item
·
Ｐｒｅｓｓ ｔｈｅ
button to return to the previous menu or exit the menu.