Hisense RS694N4TIE User Manual

adjusta e bottomf etbl e
adjusta e bottomf etbl e
Warning!
For proper installation, this refrigerator
must be placed on a level surface of
hard material that is the same height
as the rest of the flooring. This surface
should be strong enough to support a
fully loaded refrigerator.
The rollers, which are not castors,
should be only used for forward or
backward movement. Moving the
refrigerator sideways may damage
your floor and the rollers.
Leveling of appliance
For sufficient leveling and air
circulating in the lower rear section of
the appliance, the bottom feet may
need to be adjusted. Please use a
suitable spanner.
To allow the doors to self-close, tilt
back the top backwards at about
15mm or 0.5 by turning the°
adjustable feet.
Whenever you want to move the
appliance, remember to turn the feet
back up, so that the appliance can roll
freely. Reinstall the appliance when
relocating.
0.5
15mm
9

Hisense RS694N4TIE Specifications

General

Connected load	- W
Energy efficiency scale	A to G
Annual energy consumption	323 kWh
Star rating	4*
Freezer position	Side-placed
Freezing capacity	11 kg/24h
No Frost (freezer)	Yes
Freezer net capacity	191 L
Freezer door balconies	3
Freezer number of shelves/baskets	4
Storage time during power failure	6 h
Freezer number of vegetable drawers	2
Fridge net capacity	371 L
Fridge door balconies	5
Fridge number of compressors	1
Noise level	42 dB
Climate class	-
Total net capacity	562 L
Control type	Touch
Display type	LED
Product color	Stainless steel
Product design	American door
Housing material	Steel
Shelves material	Glass
Appliance placement	Freestanding
Package depth	777 mm
Package width	979 mm
Package height	1877 mm
Package weight	121000 g
Gross weight	1210000 g

Weight and Dimensions

Depth	689 mm
Width	910 mm
Height	1786 mm
Weight	110000 g