19Making Connections
Send Files
1. Make sure Bluetooth is turned on.
2. Press & hold the file you want send, tap share icon > Bluetooth icon .
3. Tap the device you want to send it to. The Sero 8 begins to send the file.
Tip: You can see the sending status in Notification Tray.
Receive Files
1. Make sure Bluetooth is turned on and visible. To set Visibility timeout, go to
Settings > WIRELESS & NETWORKS > Bluetooth > Menu icon > Visibility
timeout.
2. When the Bluetooth share icon is shows up in Notification bar, open
the Notification Tray and tap the notification, follow the instructions to
complete the receiving.
3. To check the information of Bluetooth received, go to Settings > WIRELESS
& NETWORKS > Bluetooth > Menu icon > Show received files.
Tip: You can see the receiving status in Notification Tray.
Rename or Unpair a Bluetooth Device
You can change the name of the Bluetooth device as it appears on your Sero 8.
You can also unpair a Bluetooth device.
1. Go to Settings > WIRELESS & NETWORKS, make sure Bluetooth is turned on.
2. In the Bluetooth settings, tap the Settings icon beside the connected
Bluetooth device you want to configure.
3. A screen opens that allows you to change the device’s name or unpair it.
To Next Page
