18Making Connections
2. Press & hold the VPN you want to delete.
3. In the dialog that opens, touch Delete profile.
Bluetooth
You can use Bluetooth to communicate between the Sero 8 and other
Bluetooth devices, such as a Bluetooth headset over a distance of about 8
meters.
NOTES
• To extend the life of your battery between charges, turn off Bluetooth
when you’re not using it.
• The Wi-Fi function and the Bluetooth function can simultaneous
operation, but can not simultaneous transmit.
To connect to a Bluetooth device, first turn on your Sero 8’s Bluetooth. Then,
the first time you use a new Bluetooth device, you need to “pair” it with your
Sero 8 so that both devices know how to connect securely to each other. After
that, they connect automatically.
To turn Bluetooth on or off, open Quick Settings, tap Bluetooth icon. You can
also go to Settings > WIRELESS & NETWORKS and then slide the Bluetooth
switch.
Pairing Bluetooth Devices
Before you can use a Bluetooth device with the Sero 8, you must first pair it.
1. Make the device you want to pair discoverable. See the documentation that
came with your device to learn how to make it discoverable.
2. Make sure Bluetooth is turned on by going to Settings > WIRELESS &
NETWORKS.
3. Tap Bluetooth. Your Sero 8 scans for and displays the ID of all available
Bluetooth devices in range.
NOTE
If your mobile device stops scanning before your Bluetooth device is
ready, tap Search for devices.
4. Tap the ID of the Bluetooth device in the list to pair with it.
5. Follow the instructions to complete the pairing. If prompted, enter a
passkey, or refer to the documentation that came with the device.
If the pairing is successful, your Sero 8 connects to the device.
Connecting Bluetooth Devices
Once you’ve paired with a Bluetooth device, then you can connect to it
manually if you want to switch devices or reconnect after it is back in range.
1. Go to Settings > WIRELESS & NETWORKS, make sure Bluetooth is turned on.
2. In the list of Paired Devices, tap a paired but unconnected device. When the
Sero 8 and the device are connected, the device is displayed as connected
in the list.
To Next Page
