Hitachi 22LD5750U - Location of Controls; DVD Player Controls and Indicators

7
Location of controls
Description of Indicators and Controls
1. Remote sensor
2.
(Standby/Timer/On) indicator: The LED indicator lights up red in standby mode, orange in
standby mode when the timer is activated, and green in the power ON mode.
3.
Loudspeakers
4.
EJECT: Eject a disc.
5.
(Volume) +/– buttons / In Menu: Setting.
6.
(Channel) /PLAY ( ϶ ) button: Press to change to a higher numbered channel set into
memory. DVD mode : Playback. In Menu: Setting. In Standby: Turning on the unit.
7.
(Channel) /STOP (Ϯ) button: Press to change to a lower numbered channel set into
memory. DVD mode : Stop. In Menu: Setting. In Standby: Turning on the unit.
8. MENU button: To display the menu screen.
9. TV/AV/PC/ENTER button: Select input mode for TV/AV/COMPONENT/HDMI/PC/DVD. In Menu :
Using as ENTER button.
10.
(Power)-key: Preparation: Connect power-cable to AC220~240V/50Hz.
a) If standby-LED is red, you may power-off. To power-off, press power-key 1x and release.
For confi rmation, standby-LED will change to dark.
b) If standby-LED is off, you may power-on. To power-on, press power-key 1x and release.
For confi rmation, standby-LED will change to red and about 1 second later to green.
c) If the TV is currently working, press power-key 1x and release to power-off.
For confi rmation, standby-LED will change to dark.
In power-off-condition, the TV’s power-consumption is approx. 1 Watt.
If total disconnection from the mains is required, pls unplug.
DVD-Player
4
5
6
7
8
9
10
1
2
3