Hitachi CB 520H B2 - Page 306

No. Item Description
Default
Value
Supported
LPAR
manager
Version
The IPv6 stateless address set on the
management module is applied to this
item.
(22)
VC
1
Sets whether to perform user
authentication when connecting to the
guest console.
Disable: Does not perform user
authentication.
Enable: Performs user authentication.
-------: Displayed when the virtual COM
console connection method is SSH.
Disable 02-05~
(23)
LP CLI
1
Sets whether to perform user
authentication when performing
connection by using the LP CLI.
Disable: Does not perform user
authentication.
Enable: Performs user authentication.
Disable 02-05~
(24)
Expiry
1
Sets the password expiration date.
0: Sets the password expiration date to
indefinite.
1 to 365: Sets the password expiration
date in the range from 1 to 365 days.
0 02-05~
(25)
Type
1
Sets the virtual COM console connection
method.
Telnet: Connects by using Telnet.
ssh: Connects by using SSH.
Telnet 02-05~
(26)
User List
2
Displays a user list. The number of
registered users is displayed in
parentheses.
• Displays user names in ascending
ASCII order.
• Up to 10 people are displayed per
page.
--- 02-05~
(27)
Name
2
Displays the user name. --- 02-05~
(28)
Remain
2
Displays the password expiration date.
The number of days remaining excluding
the current day is displayed as the
expiration date. The number of days
changes at UTC 0:00.
---: There is no expiration date.
Numbers: Displays the number of days
left until expiration.
*: The number of remaining days until
expiration is 14 or less.
--- 02-05~
7-68
Operation by LPAR manager Screen
Hitachi Compute Blade 500 Series Logical partitioning manager User's Guide