Hitachi CB 520H B3 - Page 309

Item
LPAR Status
Remark
Supported
LPAR
manager
Version
Activate Deactivate Failure
SVP IP Address
(IPv6)
- - - displayed only 02-25~
LP CLI1~8 IP
Address (IPv6)
Y Y Y - 02-25~
IPv6 Stateless
Address
- - - displayed only 02-25~
VC Y Y Y Virtual COM
console is
disconnected
when VC is
changed.
02-05~
LP CLI Y Y Y - 02-05~
Expiry Y Y Y - 02-05~
Type Y Y Y Virtual COM
console is
disconnected
when Type is
changed.
02-05~
User List - - - displayed only 02-05~
Name - - - displayed only 02-05~
Remain - - - displayed only 02-05~
Host key - - - displayed only 02-05~
Generate Host
Key
Y Y Y - 02-05~
User Information - - - displayed only 02-05~
Legend:
Y: can be changed
-: cannot be changed
How to set the LP ID
Place the cursor on the LP ID and press Enter to display a sub-screen. Enter
the new ID on the sub-screen. LP ID is used to identify of each when the
multiple LPAR manager systems exist. For example, when you control the
LPAR manager system from ServerConductor/Blade Server Manager (BSM),
LP ID is used to identify each. Therefore, when setting the LP ID, set a value
that is unique among all LPAR manager systems including Compute Blade
Series.
Operation by LPAR manager Screen
7-71
Hitachi Compute Blade 500 Series Logical partitioning manager User's Guide