5. Test Run
A16381TMF2
21
NOTES:
1. Power ON, wait 3 minutes and then change the optional setting.
2. When changing the "CF" setting (changing the louver swing angle), restore the power supply or allow the louver to make one complete swing
fully in the auto-swing mode to apply the optional setting.
3. The optional settings may be dierent according to the indoor and outdoor unit models.
Check to ensure that the unit has the optional setting.
4. Record the setting conditions for each optional setting in the "Setting" column of the table above.
5. The above optional functions marked with an "X" at the individual setting can change the condition only when "All Indoor Units" is set.
6. Up to 24 history records can be saved.
7. The history is initialized when the function selection and the input/output is initialized.
To Next Page
Loading...
