To Next Page
J
Justin ShepherdSep 7, 2025
How to fix distorted display when operating Hitachi Compute Blade 2500 Server Web console?
- DDaniel MooreSep 7, 2025
If the display is distorted when operating the Web console, refresh the Web browser.
How to fix distorted display when operating Hitachi Compute Blade 2500 Server Web console?
If the display is distorted when operating the Web console, refresh the Web browser.
How to fix Hitachi Server remote console not starting?
To resolve the issue of the remote console not starting, ensure that a supported Java VM is installed on the system console. Verify that HTTP communication via TCP port 80 and HTTPS communication via TCP port 443 is available between the system console and the server blade. Also, confirm that communication via TCP port 5001 is available. If using Oracle Java Version 7 Update 21 or later, check the Java security settings. As an alternative, you can omit the certificate invalidation check to shorten the startup time of the CD/DVD image creation tool.
How to start Hitachi Compute Blade 2500 Server remote console on Internet Explorer?
If the remote console or virtual media console does not start when using Internet Explorer 8 or later, disable the SmartScreen filter functionality.
What to do if Hitachi Server remote console cannot be started and displays 'xxxx cannot be downloaded'?
If you receive the message "xxxx cannot be downloaded" and the remote console fails to start, go to Internet Explorer, click Tools, select Internet Options from the menu. In the dialog box, click the Advanced tab and ensure that the Do not save encrypted pages to disk check box is not selected.
What to do if keystrokes are not entered or continue without stopping in Hitachi Compute Blade 2500 Server remote console?
If keystrokes continue to be entered without stopping, or are not entered at all when using the remote console, deactivate the remote console window using the mouse, and then re-activate the window. If the problem persists, exit and restart the remote console.
How to fix Java VM startup error when starting Hitachi Compute Blade 2500 Server remote console?
If a Java VM startup error message is displayed, and the remote console cannot be started, or if an older version of the remote console starts, in the Java control panel, click the General tab, and then under Temporary Internet Files, click the View button to display the temporarily saved applications. Delete these files.
What to do if Hitachi Server displays 'Network Error' dialog box?
If the Network Error dialog box is displayed during an attempt to use the console, and the virtual media console cannot be used, exit the virtual media console. In the Java Control Panel, click Security, and from Manage Certificates or Certificates, delete the following certificates: Issued to: IP-address-for-server-blade Issued by: IP-address-for-server-blade. After deleting the certificates, restart the remote console, and start the virtual media console.
What to do if Hitachi Compute Blade 2500 Server doesn't recognize virtual drive after reconnection?
If, after removing a virtual drive using the operating system on the server blade, the operating system no longer recognizes the virtual drive after it is reconnected, press the USB Reset button on the virtual media console to reset the virtual drive.
What to do when Hitachi Compute Blade 2500 Server displays 'The max number of session has been reached'?
If the message "The max number of session has been reached" is displayed on the remote screen and a connection cannot be established with the server blade, wait until the other connection is finished. If you can safely terminate the connection forcefully, execute the disconnect blade bmc session command.
Why does the cursor not respond to mouse input on Hitachi Compute Blade 2500?
If the cursor on the operating system of a remotely connected server blade does not respond to mouse input, verify that the mouse mode setting is supported by the operating system of the server blade. If the problem persists, switch to a different mouse mode and then revert to the correct mode. If the problem still persists, restart the remote console.
General| Form Factor | Blade |
|---|---|
| Processor | Intel Xeon |
| Operating System Support | Windows Server, Linux |
| Memory | Up to 192 GB per blade (DDR3) |
| Storage | SAS/SATA HDD/SSD per blade |
| Network Interfaces | 10Gb Ethernet |
| Product Type | Blade Server |
