Hitachi Compute Blade 2500 Installation Guide

1-2 Before Use
Hitachi Compute Blade Embedded 10G DCB Switch Module License Installation Guide
Purpose
This manual describes how to install the license for the Hitachi Compute Blade
Embedded 10G DCB Switch module. Before using the Embedded 10G DCB
Switch module, please also read the following manuals:
In addition, the referred manual is different depend on the system unit that
installed the Embedded DCB Switch module.
 Compute Blade 500 Series Getting Started Guide, MK-91CB500002
 Compute Blade 2000 User’s Guide, MK-99BDS2K001
 Compute Blade 2500 Series Getting Started Guide, MK-99CB2500004
 Network OS Administrator’s Guide, MK-99COM055, MK-99COM121, MK-
99CB2500041
 Network OS Command Reference, MK-99COM056, MK-99COM122, MK-
99CB2500042
Check the Package Contents
Check the following to ensure that you have received exactly what you ordered.
If you have not received what you ordered, please contact your dealer where
you purchased the package from.
 The package part number indicates exactly what you ordered.
 You have all the items shown in the Package Contents list.

Hitachi Compute Blade 2500 Specifications

General

Brand	Hitachi
Model	Compute Blade 2500
Category	Server
Language	English