Hitachi Compute Blade 500 Series - Teaming and Tag VLAN Setting (for Windows Server 2008)

LAN Advanced Functions 2-9
Hitachi Compute Blade 500 Series LAN Advanced Function Manual (for Intel)
Teaming and Tag VLAN Setting (for Windows Server 2008)
The section explains how to set the advanced function for LAN in the Windows Server
2008 environment.
It is necessary for the LAN driver for Windows Server 2008 to have been properly
installed as a prerequisite.
Make sure to install Intel(R) PROSet when using advanced functions for LAN in
the Windows 2008 environment. Follow the procedure for installing the Intel
PROSet described below.
Execute the setup program “DxSetup.exe” in the following directory in the DVD-ROM
“Driver and Utility for Windows”. The following directory is the example when the
DVD-ROM drive is drive (D:).
<Driver and Utility for Windows>
OS
Location of Tool for LAN Redundancy
Windows Server 2008 32-bit
D:\GC0x1\Win2008\Utility\PROSetDX\APPS\PROSETDX\Win32\DxSetup.exe
Windows Server 2008 64-bit
D:\GC0x1\Win2008\Utility\PROSetDX\APPS\PROSETDX\Winx64\DxSetup.exe
*: A part of the directory path "GC0x1" varies depending on server blade model