Hitachi Compute Blade 500 Series - Page 56

2-38 LAN Advanced Functions
Hitachi Compute Blade 500 Series LAN Advanced Function Manual (for Intel)
Event Log Description (Source: iANS Miniport)
OS event logs give you information on the status of advanced LAN functions.
The following table describes events logged at iANS Miniport.
(I: Information; W: Warning)
ID
Message
Description and Resolution
6 (I)
Primary adapter is initialized: <member
description>
The member LAN device as Primary Adapter has
been properly initialized.
7 (I)
Adapter is initialized: <member
description>
The member LAN device as Secondary Adapter
or as another adapter but Primary has been
properly initialized.
8 (I)
Team #<team ID>: Team is initialized.
The team comprising advanced functions has
been properly initialized.
9 (I)
Team #<ID>: Virtual Adapter for
<VLAN name> [VID=<VLAN ID>]
initialized.
VLAN has been properly initialized.
10 (I)
Current Primary Adapter is switching
from: <member description>
Current Primary Adapter is switching from the
member adapter to a member as Secondary
Adapter.
11 (W)
Adapter link down: <member
description>
The member adapter link is down. Check cable
connections.
12 (I)
Secondary Adapter took over:
<member description>
Due to failure in the LAN device as Primary
Adapter, a member adapter as Secondary
Adapter has took over the network processing.
13 (W)
The <member description> has been
deactivated from the team.
The member adapter has been deactivated from
the team. There is a problem in Primary device,
Secondary device, or the connecting route.
14 (I)
Secondary Adapter has rejoined the
Team: <member description>
The deactivated member LAN device has been
added to the team again.
15 (I)
Adapter link up: <member description>
The member LAN device link is up again.
16 (W)
Team #<ID>: The last adapter has lost
link. Network connection has been lost.
All LAN devices in the team have lost link.
17 (I)
Team #<ID>: An adapter has re-
established link. Network connection
has been restored.
Network connection in the LAN device team has
been restored.
18 (I)
Preferred primary adapter has been
detected: <member description>
The member LAN device specified as Primary
adapter has been detected.
19 (I)
Preferred Secondary Adapter has been
detected: <member description>
The member LAN device as specified as
Secondary adapter has been detected.
20 (I)
Preferred primary adapter took over:
<member description>
The member LAN device specified as Primary
adapter has taken over the network processing.
21(I)
Preferred secondary adapter took over:
<member description>
The member LAN device specified as Secondary
adapter has taken over the network processing.
22 (W)
Primary Adapter does not sense any
Probes: <member description>
The member LAN device as Primary Adapter
does not sense any probe packets.
Possible reason: partitioned Team.
35 (W)
Initializing Team #<ID> with <missing
#> missing adapters. Check the
configuration to verify that all the
adapters are present and functioning.
The team # is being initialized with missing or
inactive adapters#. Check if all LAN devices are
properly implemented and functioning.
37 (I)
Virtual adapter for <VLAN name>
[VID=<VLAN ID>] removed from team
#<team ID>.
Virtual adapter with VLAN name [VID=VLAN ID]
has been removed from the team.
38 (I)
Adapter removed from team #<ID>.
The LAN device has been removed from the
team.