21
The message is appeared when the wireless
adapter you selected is already used for
another network connection.
• To connect, click the [Yes]. Proceed to item
1.8 Confirming the connection to your
destination. (
31)
• Not to connect, click the [No] then the
“LiveViewer” main menu is displayed even
though the network is not established.
Click
on the main menu to go back
to item 1.5 Selecting the network
connection method. (15)
Are you sure you want to connect the selected projector?
1. Connection to the network
1.5 Selecting the network connection method (continued)
To Next Page
Loading...
