39
2. Network Presentation
2.1 Using the “LiveViewer” (continued)
e Hold button
The image on screen is temporally frozen.
The last image before the button is clicked is remained on screen.
You can revise the image data on your computer without showing it on the
projector’s screen.
r Display mode button (
41)
The button switches the Single PC mode and Multi PC mode.
t Connect button
The screen to select the connection mode is displayed.
Go to item 1.5. (15)
y Option button
The option screen is displayed.
u Web control button
Starts the Web browser on your computer and displays Web control screen
to control the projector and change various settings for the projector. (
46)
i Information button
The version of the “LiveViewer” is displayed.
o, a Close button
The network is disconnected and the “LiveViewer” is closed.
s Minimize button
The displayed icon changes as shown below depending on the status of the
“LiveViewer”. If the icon is double-clicked, the last type of the main menu will
be shown on screen.
Connected
Disconnected Not connected Hold
To Next Page
Loading...
