Item Description
INFORMATION
Selecting this item displays the NETWORK_INFORMATION dialog
for conrming the network settings.
• For the details of PASSCODE, see the section Selecting the
network connection method in the User’s manual – Network
Guide.
• Only the first 16 characters of the projector name are displayed.
•
When the voltage level of the battery for the built in clock
decreases, the set time may become incorrect even though accurate
date and time are input. Replace the battery suitably
(96).
• IP ADDRESS, SUBNET MASK and DEFAULT GATEWAY indicate
“0.0.0.0” when DHCP is ON and the projector has not gotten
address from DHCP server.
SERVICE
Executing this item restarts and initializes the network functions.
Choose the RESTART EXECUTE using the button ►.
Then use the button ► to execute.
Network will be once cut off when choose restart.
If DHCP is selected on, IP address may be changed.
After selecting RESTART EXECUTE, NETWORK menu may not be
controlled approx. 30 seconds.
To Next Page
Loading...
Need help?
General