EasyManuals Logo

Hitachi CP-AX3005 User Manual

Hitachi CP-AX3005
116 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #113 background imageLoading...
Page #113 background image
113
Troubleshooting
Phenomenon Cases not involving a machine defect
Reference
page
Video screen
display freezes.
The FREEZE function is working.
Press FREEZE button to restore the screen to normal.
30
Colors have a
faded- out
appearance, or
Color tone is
poor.
Color settings are not correctly adjusted.
Perform picture adjustments by changing the COLOR TEMP, COLOR,
TINT and/or COLOR SPACE settings, using the menu functions.
38, 43
COLOR SPACE setting is not suitable.
Change the COLOR SPACE setting to AUTO, RGB,
SMPTE240, REC709 or REC601.
43
Pictures appear
dark.
The brightness and/or contrast are adjusted to an
extremely low level.
Adjust BRIGHTNESS and/or CONTRAST settings to a
higher level using the menu function.
36
The projector is operating in Eco mode.
Set ECO MODE to OFF, and set AUTO ECO MODE to OFF,
in the SETUP menu.
50
The lamp is approaching the end of its product lifetime.
Replace the lamp.
98, 99
When the internal temperature is high (even if the
ambient temperature is lower than 35°C), the brightness
of lamp might be reduced automatically.
Please clean or replace the air lter.
100
Pictures appear
blurry.
Either the focus and/or horizontal phase settings are
not properly adjusted.
Adjust the focus using the FOCUS button, and/or H PHASE
using the menu function.
26, 42
The projection window is dirty or misty.
Clean the projection window referring to the section “Caring
for the projection window”.
102
Some kind
of image
degradation
such as
ickering or
stripes appear
on screen.
When the projector is operating in Eco mode, ickering
may appear on screen.
Set ECO MODE to OFF, and set AUTO ECO MODE to OFF,
in the SETUP menu.
50
The OVER SCAN ratio is too big.
Adjust OVER SCAN in the IMAGE menu smaller.
40
Excessive VIDEO NR.
Change the setting of VIDEO NR in the INPUT menu.
43
The FRAME LOCK function cannot work on the current
input signal.
Set FRAME LOCK in the INPUT menu to OFF.
45
Phenomena that may be easy to be mistaken for machine defects (continued)
(continued on next page)

Other manuals for Hitachi CP-AX3005

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Hitachi CP-AX3005 and is the answer not in the manual?

Hitachi CP-AX3005 Specifications

General IconGeneral
BrandHitachi
ModelCP-AX3005
CategoryProjector
LanguageEnglish

Related product manuals