To Next Page

To Previous Page

Operating

Press ASPECT button on the remote control.

Each time you press the button, the projector switches the

mode for aspect ratio in turn.

Selecting an aspect ratio

● ASPECT button does not work when no proper signal is inputted.

● NORMAL mode keeps the original aspect ratio setting.

● The on-screen menu might be displayed outside of the image display area

depending on the adjustment value of the ASPECT, D-ZOOM, KEYSTONE,

KEYSTONE and PERFECT FIT. Changing the values of ASPECT, D-ZOOM,

KEYSTONE, KEYSTONE and PERFECT FIT may x the symptom.

 For a computer signal

NORMAL  4:3  16:9  16:10  NATIVE

 For a video signal or component video signal

4:3  16:9  16:10  14:9  NATIVE

 For an input signal from the LAN, USB TYPE A or USB TYPE B port, or

if there is no signal

CP-AX2505, CP-AX3005, CP-AX3505: 4:3 (xed)

CP-AW2505, CP-AW3005: 16:10 (xed)

 For an HDMI

signal

NORMAL  4:3  16:9  16:10  14:9  NATIVE

ASPECT button

CALIBRATION

KEYSTONE/

ASPECT

ACCENTUALIZER

HDCR

AV MUTE

POSITION

ESC MENU

RESET

IWB

AUTO

PAGE

DOWN

OFF

FREEZE

ENTER

FOCUS

D-ZOOM

＋

ー

VOLUME

MAGNIFY

MYBUTTON

INPUT

PERFECT FIT

TEMPLATE

Press INPUT button on the projector.

Each time you press the button, the

projector switches its input port from

the current port as below.

Selecting an input signal

●

While ON is selected for AUTO SEARCH item in OPTION menu (60), the projector

will keep checking the ports in above order repeatedly till an input signal is detected.

●

It may take several seconds to project the images from the USB TYPE B port.

COMPUTER IN1  COMPUTER IN2

VIDEO LAN

HDMI

2 USB TYPE A

HDMI 1



USB TYPE B

INPUT button