62
OPTION menu
Item Description
MY BUTTON
This item is to assign one of the following functions to MY BUTTON
1/2 on the remote control (
6).
(1) Use the ▲/▼ buttons on the MY BUTTON menu to select a MY
BUTTON - (1/2) and press the ► or ENTER button to display the
MY BUTTON setup dialog.
(2) Then using the ▲/▼/◄/► buttons sets one of the following
functions to the chosen button. Press the ENTER or INPUT
button to save the setting.
• COMPUTER IN1: Selects the input from COMPUTER IN1 port.
• COMPUTER IN2: Selects the input from COMPUTER IN2 port.
• LAN: Selects input from LAN port.
• USB TYPE A: Selects input from USB TYPE A port.
• USB TYPE B: Selects input from USB TYPE B port.
• HDMI1: Selects input from HDMI 1 port.
• HDMI2: Selects input from HDMI 2 port.
• VIDEO: Selects the input from VIDEO IN port.
• SLIDESHOW: Selects the input from USB TYPE A port, and starts
a Slideshow.
• MY IMAGE: Displays the MY IMAGE menu.
• MESSENGER:
Turns the messenger text displayed on the screen on/off
(
Messenger Function in the User's Manual - Network Guide
).
When there is no transferred text data to display, the message ”NO
MESSENGER DATA" appears.
• INFORMATION: Displays SYSTEM_INFORMATION,
INPUT_INFORMATION (
73), WIRELESS INFORMATION,
WIRED INFORMATION or nothing.
• MY MEMORY: Loads one of adjustment data stored (
39).
When more than one data are saved, the adjustment
changes every time the MY BUTTON is pressed.
When no data is saved in memory, the
dialog "No saved data" appears.
When the current adjustment is not
saved to memory, the dialog as shown in
the right appears.
If you want to keep the current adjustment, please press
the ► button to exit. Otherwise loading a data will overwrite the
current adjusted condition.
(continued on next page)
To Next Page
Loading...
Need help?
General